water faucet shower knowledge:
tips on maintenance of water faucet shower, from a variety of maintenance to elaborate. Due to water quality, environmental factors, internal shower will produce a certain amount of limescale and impurities. Limescale and impurities accumulated to a certain extent, may have an impact on bathing comfort, and even destructive effect on shower, so pay attention to products for proper maintenance and care.
brass water faucet
Methods/steps water faucet.
A, Removal of limescale:
shower after a period of time, it is likely to accumulate some limescale, resulting in poor water flow or flow disorder and other situations. Limescale cleaning is inevitable work of shower, according to different functions of shower itself, mainly divided into following categories.
a: Manual cleaning:
you need to take off shower head at mesh or other parts of adsorption of limescale, cleaned with a brush and then placed back in place. Some brands of showerheads are sold with a special showerhead opening tool, convenient for consumers.
water faucet
b: Hand wipe type cleaning:
water outlet hole of this type of shower is designed with rubber grains, rubber material is soft and comfortable to touch, and easy to clean, just use your fingers to wipe rubber particles, you can easily rub the scale, pop out. This cleaning method makes good use of characteristics material ,and is now a more popular cleaning method in market.
c: automatic cleaning:
because of special structure of certain types of shower, scale will be automatically cleaned out during use. For example, some shower heads have cleaning needles inside, when conversion of water way out, cleaning needle will automatically pop out and bring out limescale.
Here is a reminder that even if your shower has an automatic cleaning function, it is best to open shower head after a long time ,and give it a thorough manual cleaning to shower the most careful care. Every six months or less, shower will be removed in a small pot, with edible white vinegar on surface of shower and internal watering and soaking 4-6 hours, and then gently wipe surface of shower spout with a cotton rag: re-install connector and pass water for a few moments, to be white vinegar and scale with water flow out, to eliminate or reduce impact of scale on shower, and can play a certain sterilization effect.
Second,
faucet plating surface maintenance: often with a soft cloth sticky little flour wipe shower plating surface, and then rinse with water can make shower surface shiny as new.
water faucet
Caution
a: Please pay attention to safety of yourself and product, when disassembling and assemblingshower.
b: ,filter gasket should not use mesh too large or too fine, if large may not play a role in filtering impurities.too fine may affect flow of water, specification of filter to 40-60 mesh is appropriate. (Tip:efers to the particle size or coarseness of material, general definition is the number of mesh in the area of 1 inch * 1 inch. the number of mesh screen, material can pass through mesh that is defined as how many mesh. such as 200 mesh, is material can pass through 1 inch * 1 inch in screen with 200 mesh.)
c: Do not use strong acid to remove scale, so as not to cause corrosion on surface of shower.
d: Please do not forcibly disassemble shower for maintenance, improper disassembly will cause damage to product appearance and internal structure.
e: use of shower can not exceed 70 degrees Celsius, high temperature and ultraviolet light will greatly accelerateaging of the shower, shorten service life of shower, so installation of shower as far as possible from bath and other electrical heat sources. Shower can not be installed in bath bar directly below, and distance should be more than 60CM.
